Diaphragm àtọwọdá pneumatic actuator PTFE PFA Ila
Diaphragm àtọwọdá pneumatic actuator PTFE PFA Ila
Pneumatic PTFE PFA Ila diaphragm àtọwọdá sipesifikesonu
| Pneumatic PTFE PFA Ila diaphragmIṣakoso àtọwọdá Iru ara: | taara nipasẹ simẹnti agbaiye iru Fluoride (PTFE, FEP, PFA) ni ila |
| Irú Spool: | ti kii-iwontunwonsi nikan ijoko plug iru |
| Iwọn orukọ: | DN20~200, NPS 3/4〞~ 8〞 |
| Titẹ orukọ orukọ: | PN16 ~ 100, CLASS 150LB ~ 600LB |
| Asopọ: flange: | FF, RF, MF, RTJ |
| Alurinmorin: | SW, BW |
| Iwọn Flange: | Gẹgẹbi IEC 60534 |
| Pneumatic PTFE PFA Laini iṣakoso diaphragm àtọwọdá Iru Bonnet: | Ⅰ: boṣewa iru (-29℃ ~ 150℃) |
| Iṣakojọpọ: | V iru PFTE iṣakojọpọ, rọ.lẹẹdi packing, ati be be lo. |
| Apoti: | Iṣakojọpọ lẹẹdi irin |
| Oluṣeto: | Pneumatic: olona-orisun diaphragm actuator, piston iru actuator. |
Akojọ ohun elo
| Orukọ paati | Iṣakoso àtọwọdá elo |
| Ara/Bonnet | WCB/CF8/CF8M/CF3M |
| Ohun elo ila | PTFE, FEP, PFA |
| Iṣakoso àtọwọdá spool / ijoko | 304/316/316L Ila PTFE/FEP/PFA |
| Iṣakojọpọ | PTFE |
| Gasket | PTFE |
| Ideri diaphragm | Deede:Q235, Pataki:304 |
| Diaphragm | NBR pẹlu fikun polyester fabric |
| Orisun omi | Deede: 60Si2Mn, Pataki: 50CrVa |
| Iṣakoso àtọwọdá yio | 2Cr13 / 17-4PH / 304/316/316L |
Àtọwọdá iṣẹ
| Pneumatic PTFE PFA Lined diaphragm Iṣakoso àtọwọdá Sisan iwa | Laini, ogorun, ṣiṣi ni kiakia | |
| Allowable ibiti o | 30:1 | |
| Ti won won CV iye | Ogorun CV6.3 ~ 400 ， laini CV6.9 ~ 440 | |
| Pneumatic PTFE PFA Laini iṣakoso diaphragm àtọwọdá Allowable jijo | Igbẹhin rirọ: VI ite (ipe foomu) Idiwọn jijo: GB/T 4213 | |
| Pneumatic PTFE PFA Lined diaphragm Iṣakoso àtọwọdá Iṣe | ||
| Aṣiṣe ojulowo(%) | ± 1.5 | |
| Iyatọ pada (%) | ≤1.5 | |
| Agbegbe oku(%) | ≤0.6 | |
| Iyatọ lati ibẹrẹ si aaye ipari(%) | ± 2.5 | |
| Iyatọ irin-ajo ti wọn ṣe (%) | ≤2.5 | |
Àtọwọdá actuator sipesifikesonu
| Pneumatic fluorine ila Iṣakoso àtọwọdá Iru ọna ọna | Pneumatic diaphragm actuator |
| PZMA-4 ~ PZMA-7 | |
| Olona-orisun omi iru | |
| Lilo | Regulating iru, ON-PA iru |
| Air ipese titẹ tabi Power ipese foliteji | Titẹ ipese afẹfẹ (Iwọn orisun omi) 140 (20～100) Kpa G 240 (40～200) Kpa G 280 (80～240) Kpa G |
| Asopọmọra | Asopọmọra paipu: RC1/4 |
| Taara igbese | Ilọsi titẹ, yoo sọkalẹ, valve sunmọ. |
| Idahun | Ilọsi titẹ, yio goke, valve ìmọ. |
| Ifihan agbara titẹ sii | 40 ~ 20mA.DC (pẹlu positioner) |
| Aisun | ≤1%FS (pẹlu positioner) |
| Iru laini | 2% FS (pẹlu ipo) |
| Iwọn otutu ayika | -10℃～+70℃ |
| Pneumatic PTFE PFA Ila ti diaphragm iṣakoso àtọwọdá Awọn ẹya ẹrọ | E/P, P/P àtọwọdá positioner, àlẹmọ eleto, àtọwọdá àtọwọdá, solenoid àtọwọdá, lopin yipada Awọn ẹya ẹrọ ti kii ṣe deede, nilo awọn akọsilẹ adani pataki. |
Àtọwọdá imọ paramita
| Iwọn orukọ, DN | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | ||
| Olusọdipúpọ sisan ti o ni iwọn, Cv | Ogorun | 8 | 12 | 20 | 32 | 50 | 70 | 100 | 200 | 240 | ||
| Laini | 5 | 10 | 16 | 25 | 38 | 63 | 80 | 120 | 220 | 300 | ||
| Irin-ajo | 16mm | 25 mm | 40mm | 60mm | ||||||||
| Oluṣeto pneumatic Agbegbe ti o munadoko diaphragm, Ae (cm2) | ZHA/B-22 | ZHA/B-23 | ZHA/B-34 | ZHA/B-45 | ||||||||
| 350 | 350 | 560 | 900 | |||||||||
| Iṣe | Orisun omi ibiti o | Pneumatic PTFE PFA Laini iṣakoso diaphragm àtọwọdá O pọju.Iyatọ titẹ ti a gba laaye (MPa) | ||||||||||
| Afẹfẹ ṣii | 20-100KPa | 1.16 | 0.7 | 0.44 | 0.28 | 0.18 | 0.17 | 0.11 | 0.07 | 0.07 | 0.05 | |
| 40-200 KPa | 3.34 | 2.14 | 1.31 | 0.84 | 0.53 | 0.51 | 0.33 | 0.21 | 0.22 | 0.15 | ||
| 80-240 KPa | 6.4 | 4.99 | 3.05 | 1.95 | 1.25 | 1.18 | 0.78 | 0.5 | 0.51 | 0.36 | ||
| Afẹfẹ sunmọ | 20-100KPa | 2.23 | 2.14 | 0.87 | 0.56 | 0.35 | 0.34 | 0.22 | 0.14 | 0.15 | 0.1 | |
| 40-200 KPa | 6.4 | 6.4 | 5.86 | 3.64 | 2.3 | 2.21 | 1.43 | 0.91 | 0.95 | 0.66 | ||
| 80-240 KPa | 6.4 | 6.4 | 6.4 | 5.04 | 3.18 | 3.06 | 1.98 | 1.26 | 1.32 | 0.92 | ||
Kọ ifiranṣẹ rẹ nibi ki o si fi si wa
